$90.00

BCBF-100 Broadcast band rejection filter
[BCBF-100]

BROADCAST –BAND REJECTION FILTER

Model BCBF-100

This high performance filter is designed especially when Broadcast Band (BCB) overloaded shortwave or Ham frequencies, or where spurious BCB signals appear. This is due to inadequate front-end selectivity or poorly RF amplifier

The BCB rejection filter is inserted between the antenna and the receiver. It is designed to perform as a receive only filter. BCB signal below 1.8 MHz is attenuated by more than 58 dB Signals above 1.75 MHz pass with .08 dB of attenuation. Input/output Impedance: 50 ohms

The BCB Rejection Filter is housed in a aluminum box. Input and output connectors are silver plated SO-239. Different input/output connectors are available upon request for a minimal charge. The input is protected from static and overloaded signal with diode discharge. No power is required. Jumper cable is included with 2 PL-259 connector.

Specifications:

·         Input/Output Impedance: 50 ohms

·         Passband insertion loss @ 4.0 MHz: -0.5 dB

·         -60 dB attenuation point: 1.22 MHz
Signals below 1.2 MHz are attenuated 60 dB

·         Static protection is provide on the input.

Reviews
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Share Product
Share via E-Mail
Share on Facebook Share on Twitter
osCommerce